Site traffic information and cookies

We use cookies to collect and analyse information on our site's performance and to enable the site to function. Cookies also allow us and our partners to show you relevant ads when you visit our site and other 3rd party websites, including social networks. You can choose to allow all cookies by clicking ‘Allow all’ or manage them individually by clicking ‘Manage cookie preferences,’ where you will also find more information.

Manage cookie preferences

Skip to Main Content
  1. Home
  2. Products
  3. Energy
  4. Oil and gas
  5. Seal oil systems

Seal oil systems

An operator checks equipment on his daily routine on board the Cassia A and Cassia B platforms, offshore Trinidad.
Seal oil systems are used extensively in the offshore industry particularly on production machinery

 

For use in equipment where there is a difference in pressure between the internal process and the atmosphere – such as axial gas compressors – seal oils are normally thin, have good thermal stability and are free from solid, anti-wear or EP additives.

Viscosity is critical and OEM guidance is required.

Always check your equipment manual and consult a Castrol Technical Service Engineer to choose the right product for the right application.

Related items / products:

Research in the laboratory

Transcal LT

Transcal LT is a low temperature mineral heat transfer fluid. It combines low vapor pressure, and high levels of thermal stability, specific heat and thermal conductivity with exceptional low temperature fluidity. Recommended for non-pressurized closed liquid phase heating systems that incorporate heating and cooling branches.
Scientist holding containers

Transcal N

This high quality mineral oil has low vapor-pressure characteristics and high levels of thermal stability, specific heat and thermal conductivity. Recommended for non-pressurized, closed liquid-phase heating systems operating at bulk-fluid temperatures up to 320ºC, maximum film temperature of 340ºC. Widely used where waste heat is extracted from flue gases.
Chemist examines fluid in bottle

Hyspin Spindle oil E5 & 10

A primary choice for seal oil systems used offshore, the Hyspin Oil range is based on highly refined mineral oil enhanced with rust and oxidation inhibitors. It is formulated to lubricate all types of spindle bearings, including high speed spindle bearings.
Chemist examines samples

Magna range

Castrol Magna are high quality additive-free oils with good oxidation resistance and demulsification properties. They suit a variety of applications including lubricating bearings and spindles. Heavier viscosity grades suit moderately loaded gearboxes. Also suitable for use in vacuum pumps and hydraulic systems which require an ‘ISO HH’ fluid type.
Masked chemist taking sample

Hyspin VG 22

Hyspin VG 22 is a low viscosity mineral oil intended for use in oil film barrier seals on rotating equipment such as gas compressors and main oil line pumps. Its excellent low temperature properties and high temperature stability suit a wide range of conditions and extend seal life.
Chemist looking through microscope

Perfecto MSO ASA III

Perfecto MSO ASA III acts as an oil film barrier seals on rotating equipment and gas compressor applications. Improved electrical conductivity reduces the risks associated with static electricity discharges in process gas equipment, particularly where inert gas blanketing of oil reservoirs is not available.