Castrol BioStat
Environmentally Acceptable Lubricant** for thruster gears with outstanding performance when compared with mineral oils.
What it’s for
- Designed to protect thruster gear boxes, reduction gear, spur, helical and planetary gear units, couplings, rolling and sliding bearings, deck machinery gearboxes
Why you need it
- To comply with the US Vessel General Permit (VGP) legislation
- Castrol BioStat products are committed to certified carbon neutral*** in accordance with PAS 2060 from 2021
*In accordance with PAS 2060, see www.castrol.com/cneutral for more information.
***The CO2 emissions are calculated in accordance with the Greenhouse Gas Protocol’s Product Life Cycle Standard and include life cycle
emissions. The demonstration of carbon neutrality is assured by an Independent Third-Party and certified to BSI’s PAS 2060 carbon neutral specification. See www.castrol.com/cneutral for more information.
- Approved by major original equipment manufacturers
- To preserve the efficiency of thrusters and help to reduce maintenance: the oil combines very good protection, extended drain performance and versatility
Environmentally acceptable lubricant (EAL)**
- Meets the definition of an EAL** under the 2018 US Vessel Incidental Discharges Act (VIDA) based on the requirements in the 2013 US VGP
- OSPAR**** tested and registered
- Reduced environmental impact***** when compared to conventional mineral oils
o Superior marine biodegradation
o Significantly reduced bioaccumulation****** and toxicity to marine organisms
o Enhanced renewability
**A lubricant, including any oil or grease, that is ‘‘biodegradable,’’ ‘‘minimally toxic,’’ and ‘‘not bio accumulative’’ as defined by US VGP 2013.
****OSPAR – Oslo and Paris Convention for the Protection of the Marine Environment of the North-East Atlantic.
*****Source: Product Data Sheet.
******Using OSPAR criteria for assessing bioaccumulation potential.
Reliability
High specification synthetic oil, tested and approved by several thruster original equipment manufacturers
- Good oxidation stability, anti-corrosion and anti-wear properties
- Proven outstanding gear and bearing protection compared with standard mineral gear oils
o Exceptional anti-wear performance (FAG FE-8 bearing test)
o Outstanding performance (FZG slow speed wear test)
- Good micro pitting resistance – suitable as a gear oil for deck machinery too
- High Viscosity index from ISO VG 68 to ISO VG 150
- Thermally stable to protect over a wide range of operating temperatures (-10ºC to 150ºC)
- Very good seal compatibility (ISO standard 6072:2002 and OEM elastomer testing)