Castrol Edge

*When choosing oil, please refer to your owner's handbook. The product specifications required may also be suitable for other vehicles

Castrol EDGE 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils. 

Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.

APPLICATION:

Castrol EDGE 0W-20 C5 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel vehicles where the manufacturer recommends: ACEA C5, API SP, ILSAC GF-6 or earlier specification 0W-20 lubricant. Holding the API SP specification, EDGE 0W-20 C5 is recommended for use in many of today’s downsized turbo engines to protect against the damages cause by low speed pre-ignition (LSPI).

Castrol EDGE 0W-20 C5 is approved for use in a wide range of vehicles from leading manufacturers please refer to the specifications section and your owners handbook. 

BENEFITS:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across all engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

*When choosing oil, please refer to your owner's handbook. The product specifications required may also be suitable for other vehicles

Castrol EDGE 0W-30 C2 with Fluid TITANIUM is formulated for prestige and high performance engines in both petrol and diesel passenger, light commercial vehicles, naturally aspirated or turbocharged, including those fitted with Diesel Particulate Filters (DPF).

The exceptional characteristics of Castrol EDGE 0W-30 C2 ensure that all engine components, from the valve train to the bearings are fully lubricated to provide optimum engine performance and protection for today's modern engines requiring lower viscosity higher performance oils.

APPLICATION:

 Castrol EDGE 0W-30 C2 is an advanced full synthetic engine oil that provides outstanding wear protection in performance engines, designed to run at their optimum level on lower viscosity oils, where the manufacturer recommends an ACEA C2 or earlier specification 0W-30 lubricant.

Castrol EDGE 0W-30 C2 is approved for use in vehicles that require Jaguar Land Rover engine oil specification STJLR.03.5007 0W-30 lubricant.

BENEFITS:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across all engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Castrol EDGE 5W-30 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils. 

Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.

APPLICATION:

Castrol EDGE 5W-30 A3/B4 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel vehicles, where the manufacturer recommends an ACEA A3/B4, API SL/CF or earlier specification 5W-30 lubricant.

Castrol EDGE 5W-30 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

 Castrol EDGE 5W-30 LL with Fluid TITANIUM is an advanced full synthetic engine oil suitable for use in a wide range of vehicles included those fitted with Diesel Particulate Filters (DPF).

Giving you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.

APPLICATION:

Castrol EDGE 5W-30 LL is an advanced full synthetic engine oil approved for use in automotive petrol and diesel vehicles - including diesel vehicles equipped with a diesel particulate filter, where the manufacturer recommends an ACEA C3 specification 5W-30 lubricant.

Castrol EDGE 5W-30 LL is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

• Sustains maximum performance even when under pressure
• Reduces power-robbing friction across engine speeds and conditions
• Independently qualified and improves engine efficiency
• Protects the engine for the entire drain interval even under extreme pressure
• Suitable for use in vehicles fitted with Diesel Particulate Filters (DPF)

Replaces Castrol EDGE 5W-40 SN

Castrol EDGE 5W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils.

Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to10% of an engine’s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.

APPLICATION:

Castrol EDGE 5W-40 A3/B4 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel vehicles where the manufacturer
recommends ACEA A3/B3, A3/B4 or API SN/CF or earlier specification 5W-40 lubricant.

Castrol EDGE 5W-40 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
  

Castrol EDGE 10W-30 with Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. 

Castrol EDGE 10W-30 is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils.

APPLICATION:

Castrol EDGE 10W-30 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel* engines where the manufacturer recommends an ACEA A5/B5,  API SN/CF, ILSAC GF-5 or earlier specification 10W-30 lubricant.

Castrol EDGE 10W-30 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

*Excludes diesel passenger vehicles fitted with Diesel Particulate Filters (DPF).

BENEFITS:

• Delivers and sustains maximum horsepower for longer, even when under pressure
• Reduces engine deposits to help maximise engine response
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturersHelps provide enhanced fuel efficiency
   

Castrol EDGE 25W-50 with Fluid TITANIUM is a race bred oil specially formulated for modified engines, push-rod technology, street machines, big bore competition engines, naturally aspirated, supercharged or turbocharged.

Castrol EDGE 25W-50 has demonstrated superior protection in certain highly loaded valve-train components and delivers optimal cam-wear protection for radical cam profiles.

APPLICATION:

Castrol EDGE 25W-50 provides outstanding wear protection in big bore street machines and competition engines. It is suitable for use where the manufacturer recommends an API SG/CD or earlier specification 25W-50 lubricant.

Also suitable for use in large in-board power and ski boats, veteran motorcycles and motor cars where high viscocity oils are specificied or required.

Castrol EDGE 25W-50 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

• Formulated with Fluid Titanium to deliver extra protection for engines under high loads, over and above traditional anti-wear additives
• Maximises short and long term performance in modified engines including street machine and big bore competition engines
• Superior thermal stability ensures minimal breakdown in formulation
• Reduces engine deposits to help maximise engine response
• Engineered to minimise oil consumption to ensure maximum potential from the oil throughout the service interval