Castrol EDGE

EDGE 0W-40 A3/B4

Castrol EDGE 0W-40 A3/B4

INDUSTRY SPECIFICATIONS AND MANUFACTURER APPROVALS:

  • ACEA A3/B3, A3/B4
  • API SN/CF
  • MB-Approval 229.3/ 229.5
  • Porsche A40
  • VW 502 00/ 505 00

SUITABLE FOR USE*:

  • Audi
  • Ford
  • Holden
  • Honda
  • Lexus
  • Mazda
  • Mercedes-Benz
  • Mitsubishi
  • Nissan
  • Porsche
  • Skoda
  • Subaru
  • Toyota
  • Volkswagen
  • Volvo

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is formulated for prestige and high performance engines in both petrol and diesel passenger*, light commercial vehicles, naturally aspirated or turbocharged.

The exceptional characteristics of Castrol EDGE 0W-40 A3/B4 ensure that all engine components, from the valve train to the bearings are fully lubricated to provide optimum engine performance and protection for today's modern engines requiring lower viscocity higher performance oils.

* Excludes diesel passenger vehicles fitted with Diesel Particulate Filters (DPF).

APPLICATION:

Castrol EDGE 0W-40 A3/B4 is an advanced full synthetic engine oil that provides outstanding wear protection in performance engines, designed to run at their optimum level on lower viscosity oils, where the manufacturer recommends an ACEA A3/B4, API SN or earlier specifcation 0W-40 lubricant.

Castrol EDGE 0W-40 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

  • Maximises short and long term engine performance
  • Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
  • Recommended by world-leading car manufacturers
  • Protects the engine for the entire drain interval even under extreme pressure
  • Extreme tested to deliver maximum horsepower up to 40% longer than other synthetic oils
*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.

EDGE 5W-30 A3/B4

CASTROL EDGE 5W-30 A3/B4

INDUSTRY SPECIFICATIONS AND MANUFACTURER APPROVALS:

  • ACEA A3/B4
  • API SL/CF
  • BMW Longlife-01
  • MB-Approval 229.3/ 229.5
  • VW 502 00/ 505 00

SUITABLE FOR USE*:

  • Audi
  • BMW
  • Chrysler/Jeep
  • Ford
  • Holden
  • Honda
  • Hyundai
  • Jaguar/Land Rover
  • Kia
  • Lexus
  • Mazda
  • Mercedes-Benz
  • Mitsubishi
  • Nissan
  • Skoda
  • Subaru
  • Toyota
  • Volkswagen

Castrol EDGE 5W-30 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils. 

Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.

APPLICATION:

Castrol EDGE 5W-30 A3/B4 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel vehicles, where the manufacturer recommends an ACEA A3/B4, API SL/CF or earlier specification 5W-30 lubricant.

Castrol EDGE 5W-30 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

  • Transforms to be strongest when the pressure is highest, protecting your engine
  • Reduces power-robbing friction across engine speeds and conditions
  • Independently tested at the highest standards for proven performance
  • Recommended by world-leading car manufacturers
  • Protects the engine for the entire drain interval even under extreme pressure
*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.

EDGE 5W-30 LL

CASTROL EDGE 5W-30 LL

INDUSTRY SPECIFICATIONS AND MANUFACTURER APPROVALS:

  • ACEA C3
  • MB-Approval 229.31/ 229.51
  • Porsche C30
  • VW 504 00/ 507 00

SUITABLE FOR USE*:

  • Audi
  • Chrysler/Jeep
  • Hyundai
  • Mercedes-Benz
  • Mitsubishi
  • Nissan
  • Porsche
  • Skoda
  • Subaru
  • Volkswagen

Castrol EDGE 5W-30 LL with Fluid TITANIUM is an advanced full synthetic engine oil suitable for use in a wide range of vehicles included those fitted with Diesel Particulate Filters (DPF).

Giving you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.

APPLICATION:

Castrol EDGE 5W-30 LL is an advanced full synthetic engine oil approved for use in automotive petrol and diesel vehicles - including diesel vehicles equipped with a diesel particulate filter, where the manufacturer recommends an ACEA C3 specification 5W-30 lubricant.

Castrol EDGE 5W-30 LL is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

  • Sustains maximum performance even when under pressure
  • Reduces power-robbing friction across engine speeds and conditions
  • Independently qualified and improves engine efficiency
  • Protects the engine for the entire drain interval even under extreme pressure
  • Suitable for use in vehicles fitted with Diesel Particulate Filters (DPF)
*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.

EDGE 5W-40 SN

CASTROL EDGE 5W-40 SN

INDUSTRY SPECIFICATIONS AND MANUFACTURER APPROVALS:

  • ACEA A3/B4
  • API SN/CF
  • BMW Longlife-01
  • MB-Approval 229.3
  • Porsche A40
  • VW 502 00/ 505 00

SUITABLE FOR USE*:

  • BMW
  • Ford
  • Holden
  • Honda
  • Hyundai
  • Kia
  • Lexus
  • Mazda
  • Mitsubishi
  • Nissan
  • Subaru
  • Toyota

Replaced by Castrol EDGE 5W-40 A3/B4

Castrol EDGE 5W-40 SN with Fluid TITANIUM is an advanced full synthetic engine oil that provides outstanding wear protection in high performance engines. 

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. 

Castrol EDGE 5W-40 SN is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles where maximum efficiency and protection is demanded.

APPLICATION:

Castrol EDGE 5W-40 SN  is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel* engines where the manufacturer recommends an ACEA A3/B4, API SN or earlier specification 5W-40 lubricant.

Castrol EDGE 5W-40 SN is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

* Excludes diesel passenger vehicles fitted with Diesel Particulate Filters (DPF).

BENEFITS:

  • Sustains maximum performance even when under pressure
  • Reduces power-robbing friction across engine speeds and conditions
  • Independently tested at the highest standards for proven performance
  • Reduces engine deposits to maximise engine response and improve engine efficiency
  • Helps engines run cooler, contributing to longer engine life
*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.

EDGE 5W-40 A3/B4

CASTROL EDGE 5W-40 A3/B4

INDUSTRY SPECIFICATIONS AND MANUFACTURER APPROVALS:

  • ACEA A3/B3, A3/B4
  • API SN/CF
  • BMW Longlife-01
  • MB-Approval 226.5/ 229.3/ 229.5
  • Porsche A40
  • Renault RN0700/ RN0710
  • VW 502 00/ 505 00

SUITABLE FOR USE*:

  • BMW
  • Ford
  • Holden
  • Honda
  • Hyundai
  • Kia
  • Lexus
  • Mazda
  • Mitsubishi
  • Nissan
  • Renault
  • Subaru
  • Toyota

Replaces Castrol EDGE 5W-40 SN

Castrol EDGE 5W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils.

Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.

APPLICATION:

Castrol EDGE 5W-40 A3/B4 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel vehicles where the manufacturer recommends ACEA A3/B3, A3/B4 or API SN/CF or earlier specification 5W-40 lubricant.

Castrol EDGE 5W-40 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

  • Transforms to be strongest when the pressure is highest, protecting your engine
  • Reduces power-robbing friction across engine speeds and conditions
  • Independently tested at the highest standards for proven performance
  • Recommended by world-leading car manufacturers
  • Protects the engine for the entire drain interval even under extreme pressure
*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.

EDGE 10W-30

CASTROL EDGE 10W-30

INDUSTRY SPECIFICATIONS AND MANUFACTURER APPROVALS:

  • ACEA A5/B5
  • API SN/CF
  • ILSAC GF-5

SUITABLE FOR USE*:

  • Ford
  • Holden
  • Honda
  • Hyundai
  • Jaguar/Land Rover
  • Kia
  • Lexus
  • Mazda
  • Mitsubishi
  • Nissan
  • Toyota

Castrol EDGE 10W-30 with Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. 

Castrol EDGE 10W-30 is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils.

APPLICATION:

Castrol EDGE 10W-30 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel* engines where the manufacturer recommends an ACEA A5/B5,  API SN/CF, ILSAC GF-5 or earlier specification 10W-30 lubricant.

Castrol EDGE 10W-30 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

*Excludes diesel passenger vehicles fitted with Diesel Particulate Filters (DPF).

BENEFITS:

  • Delivers and sustains maximum horsepower for longer, even when under pressure
  • Reduces engine deposits to help maximise engine response
  • Independently tested at the highest standards for proven performance
  • Recommended by world-leading car manufacturers
  • Helps provide enhanced fuel efficiency
*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.

EDGE 25W-50

CASTROL EDGE 25W-50

INDUSTRY SPECIFICATIONS AND MANUFACTURER APPROVALS:

  • API SG/CD

SUITABLE FOR USE*:

  • Chevrolet (pre 1980)
  • Dodge (pre 1980)
  • Ford (pre 1980)
  • Holden (pre 1980)
  • Pontiac

Castrol EDGE 25W-50 with Fluid TITANIUM is a race bred oil specially formulated for modified engines, push-rod technology, street machines, big bore competition engines, naturally aspirated, supercharged or turbocharged.

Castrol EDGE 25W-50 has demonstrated superior protection in certain highly loaded valve-train components and delivers optimal cam-wear protection for radical cam profiles.

APPLICATION:

Castrol EDGE 25W-50 provides outstanding wear protection in big bore street machines and competition engines. It is suitable for use where the manufacturer recommends an API SG/CD or earlier specification 25W-50 lubricant.

Also suitable for use in large in-board power and ski boats, veteran motorcycles and motor cars where high viscocity oils are specificied or required.

Castrol EDGE 25W-50 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

  • Formulated with Fluid Titanium to deliver extra protection for engines under high loads, over and above traditional anti-wear additives
  • Maximises short and long term performance in modified engines including street machine and big bore competition engines
  • Superior thermal stability ensures minimal breakdown in formulation
  • Reduces engine deposits to help maximise engine response
  • Engineered to minimise oil consumption to ensure maximum potential from the oil throughout the service interval
*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.

EDGE 10W-60

Castrol EDGE 10W-60

MEETS OR EXCEEDS INDUSTRY STANDARDS:

  • ACEA A3/B3, A3/B4
  • API SN/CF
  • Approved for BMW M-Models
  • VW 501 01/ 505 00

SUITABLE FOR USE*:

  • Alfa Romeo
  • Aston Martin
  • Audi
  • BMW
  • Bulgatti
  • Ferrari
  • Ford
  • FPV
  • Holden
  • McLaren
  • Porsche

Castrol EDGE 10W-60 with Fluid TITANIUM is proven and tested in the ultimate performers, the pinnacle of automotive engineering, and suitable for use in everyday high performance cars.

Giving you the confidence to demand maximum engine performance from supercars, sports cars, competition and the latest technology high-powered engines, which operate under higher pressures requiring an oil with outstanding strength and performance credentials.

APPLICATION:

Castrol EDGE 10W-60  is an advanced full synthetic engine oil suitable for use in Supercars where the manufacturer recommends an ACEA A3/B4 10W-60 lubricant including - Aston Martin V8 Vantage S, Ferrari F12 Berlinetta, Ferrari FF.

It is also suitable for use where the manufacturer requires a VW 501 01/ 505 00 approved product including - Audi R8 V10 GT, Bugatti Chiron, Bugatti Veyron.

Castrol EDGE 10W-60 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

BENEFITS:

  • Transforms to be strongest when the pressure is highest
  • Maximises short and long term engine performance
  • Delivers outstanding levels of protection across a variety of driving conditions and temperatures
  • Reduces engine deposits to help maximise engine response*
  • Proven and tested in world leading Supercars

* Compared to the limit in the ASTM D 6593 Seq VG test

Sorry, you need Javascript enabled to view this video.

Loading video

please wait...

*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.