Suggestions
View all results

IT'S MORE THAN JUST OIL. IT'S LIQUID ENGINEERING.

  1. HOME
  2. CAR ENGINE OIL
  3. ENGINE OIL BY BRAND
  4. CASTROL EDGE
  5. CASTROL EDGE OILS
  6. CASTROL EDGE

Castrol Edge

CASTROL EDGE WITH FLUID TITANIUM TECHNOLOGY – STRONGER UNDER PRESSURE

Available in the following grades:

0W-40 A3/B4
5W-30 A3/B4
5W-30 LL
5W-40 A3/B4
25W-50
0W-40 A3/B4

Castrol EDGE 0W-40 A3/B4

INDUSTRY specifications:

 

  • ACEA A3/B3, A3/B4
  • API SN / CF
  • MB-Approval 229.3 / 229.5
  • Porsche A40
  • VW 502 00 / 505 00

 

Type:

 

Full Synthetic

 

SUITABLE FOR USE*:

 

  • Audi
  • Ford
  • Holden
  • Honda
  • Lexus
  • Mazda
  • Mercedes-Benz
  • Mitsubishi
  • Nissan
  • Porsche
  • Skoda
  • Subaru
  • Toyota
  • Volkswagen
  • Volvo

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is formulated for prestige and high performance engines in both petrol and diesel passenger*, light commercial vehicles, naturally aspirated or turbocharged.

 

The exceptional characteristics of Castrol EDGE 0W-40 A3/B4 ensure that all engine components, from the valve train to the bearings are fully lubricated to provide optimum engine performance and protection for today's modern engines requiring lower viscocity higher performance oils.

 

* Excludes diesel passenger vehicles fitted with Diesel Particulate Filters (DPF).

 

APPLICATION:

 

Castrol EDGE 0W-40 A3/B4 is an advanced full synthetic engine oil that provides outstanding wear protection in performance engines, designed to run at their optimum level on lower viscosity oils, where the manufacturer recommends an ACEA A3/B4, API SN or earlier specifcation 0W-40 lubricant.

 

Castrol EDGE 0W-40 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

 

BENEFITS:

 

  • Maximises short and long term engine performance
  • Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
  • Recommended by world-leading car manufacturers
  • Protects the engine for the entire drain interval even under extreme pressure
  • Extreme tested to deliver maximum horsepower up to 40% longer than other synthetic oils
5W-30 A3/B4

Castrol EDGE 5W-30 A3/B4

Castrol EDGE 5W-30 A3/B4

INDUSTRY specifications:

 

  • ACEA A3/B4
  • API SL/CF
  • BMW Longlife-01
  • MB-Approval 229.3 / 229.5
  • VW 502 00 / 505 00

 

TYPE:

 

Full Synthetic

SUITABLE FOR USE*:

 

  • Audi
  • BMW
  • Chrysler/Jeep
  • FordHolden
  • Honda
  • Hyundai
  • Jaguar/Land Rover
  • Kia
  • Lexus
  • Mazda
  • Mercedes-Benz
  • Mitsubishi
  • Nissan
  • Skoda
  • Subaru
  • Toyota
  • Volkswagen

Castrol EDGE 5W-30 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils. 

 

Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.

 

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.

 

APPLICATION:

 

Castrol EDGE 5W-30 A3/B4 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel vehicles, where the manufacturer recommends an ACEA A3/B4, API SL/CF or earlier specification 5W-30 lubricant.

 

Castrol EDGE 5W-30 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

 

BENEFITS:

 

  • Transforms to be strongest when the pressure is highest, protecting your engine
  • Reduces power-robbing friction across engine speeds and conditions
  • Independently tested at the highest standards for proven performance
  • Recommended by world-leading car manufacturers
  • Protects the engine for the entire drain interval even under extreme pressure
5W-30 LL

Castrol EDGE 5W-30 LL

Castrol EDGE 5W-30 LL

INDUSTRY specifications:

 

 

  • ACEA C3
  • MB-Approval 229.31 / 229.51
  • Porsche C30
  • VW 504 00 / 507 00

 

TyPE:

Full Synthetic

 

SUITABLE FOR USE*:

 

  • Audi
  • Chrysler/Jeep
  • Hyundai
  • Mercedes-Benz
  • Mitsubishi
  • Nissan
  • Porsche
  • Skoda
  • Subaru
  • Volkswagen

 Castrol EDGE 5W-30 LL with Fluid TITANIUM is an advanced full synthetic engine oil suitable for use in a wide range of vehicles included those fitted with Diesel Particulate Filters (DPF).


Giving you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.

 

APPLICATION:

 

Castrol EDGE 5W-30 LL is an advanced full synthetic engine oil approved for use in automotive petrol and diesel vehicles - including diesel vehicles equipped with a diesel particulate filter, where the manufacturer recommends an ACEA C3 specification 5W-30 lubricant.

 

Castrol EDGE 5W-30 LL is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

 

BENEFITS:

 

  • Sustains maximum performance even when under pressure
  • Reduces power-robbing friction across engine speeds and conditions
  • Independently qualified and improves engine efficiency
  • Protects the engine for the entire drain interval even under extreme pressure
  • Suitable for use in vehicles fitted with Diesel Particulate Filters (DPF)
5W-40 A3/B4

Castrol EDGE 5W-40 A3/B4

Castrol EDGE 5W-40 A3/B4

INDUSTRY specifications:

 

  • ACEA A3/B3, A3/B4
  • API SN / CF
  • BMW Longlife-01
  • MB-Approval 229.3, 226.5, 229.5
  • Porsche A40
  • Renault RN 0700 / RN 0710
  • VW 502.00 / 505 00
 

TYPE:

 

Full Synthetic

SUITABLE FOR USE*:

 

  • BMW
  • Ford
  • Holden
  • Honda
  • Hyundai
  • Kia
  • Lexus
  • Mazda
  • Mitsubishi
  • Nissan
  • Renault
  • Subaru
  • Toyota
Replaces Castrol EDGE 5W-40 SN


Castrol EDGE 5W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils.


Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to10% of an engine’s performance.


Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal surfaces apart and reduces friction for maximum engine performance when you need it most.


APPLICATION:


Castrol EDGE 5W-40 A3/B4 is an advanced full synthetic engine oil suitable for use in automotive petrol and diesel vehicles where the manufacturer
recommends ACEA A3/B3, A3/B4 or API SN/CF or earlier specification 5W-40 lubricant.


Castrol EDGE 5W-40 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.


BENEFITS:

 

  • Transforms to be strongest when the pressure is highest, protecting your engine
  • Reduces power-robbing friction across engine speeds and conditions
  • Independently tested at the highest standards for proven performance
  • Recommended by world-leading car manufacturers
  • Protects the engine for the entire drain interval even under extreme pressure

 

25W-50

Castrol EDGE 25W-50

Castrol EDGE 25W-50

INDUSTRY specifications:

 

  • API SG / CD

 

TYPE:

 

Part Synthetic

SUITABLE FOR USE*:

 

  • Chevrolet (pre 1980)
  • Dodge (pre 1980)
  • Ford (pre 1980)
  • Holden (pre 1980)
  • Pontiac

Castrol EDGE 25W-50 with Fluid TITANIUM is a race bred oil specially formulated for modified engines, push-rod technology, street machines, big bore competition engines, naturally aspirated, supercharged or turbocharged.


Castrol EDGE 25W-50 has demonstrated superior protection in certain highly loaded valve-train components and delivers optimal cam-wear protection for radical cam profiles.

 

APPLICATION:


Castrol EDGE 25W-50 provides outstanding wear protection in big bore street machines and competition engines. It is suitable for use where the manufacturer recommends an API SG/CD or earlier specification 25W-50 lubricant.


Also suitable for use in large in-board power and ski boats, veteran motorcycles and motor cars where high viscocity oils are specificied or required.


Castrol EDGE 25W-50 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

 

BENEFITS:

 

  • Formulated with Fluid Titanium to deliver extra protection for engines under high loads, over and above traditional anti-wear additives
  • Maximises short and long term performance in modified engines including street machine and big bore competition engines
  • Superior thermal stability ensures minimal breakdown in formulation
  • Reduces engine deposits to help maximise engine response
  • Engineered to minimise oil consumption to ensure maximum potential from the oil throughout the service interval
     
*When choosing oil, please refer to your owner's handbook and the product specifications required may also be suitable for other vehicles.