Brushes

Equipment for today's most demanding applications

POWER & NON-POWER BRUSH UNITS

Castrol LubeCon's power and non-power brush cleaning equipment ensure that your conveyor chains and tracks are clean and free form debris. Contamination of product from a dirty chain or rail can cause rejected parts and costly down time. Castrol LubeCon's heavy duty brush cleaners are a simple solution to eliminating contamination and costly down time. Utilizing a Castrol LubeCon brush system along with Castrol LubeCon lubricants ensures your chain will be maintenance free for many years.

Castrol LubeCon Brushes

Heavy duty industrial brush cleaners demanding cleaning applications

OVERVIEW

POWER BRUSH UNITS

  • Dual high torque 120VAC or 220VAC motors with automatic reversing rotation to ensure proper chain/trolley cleaning and brush wear. Twin drive motors can take on the toughest chain debris and build up that the competition can't touch.
  • Multiple controller configuration allows you to select the right brush unit for the job. Available controller configurations are as follows: 24/7 timer, countdown timer, PLC controlled, ON/OFF switch, and remote located controllers.
  • Power brush units are available for the following track configurations: Monorail, Inverted Monorail, C-Hook, Enclosed track, and Inverted Enclosed track.
  • 7 second beacon and buzzer warning before system start-up. Heavy duty debris shield surrounding brush unit.

NON-POWER BRUSH UNITS

  • Heavy duty 15" brushes allow for better cleaning capabilities and better chain engagement.
  • Easy adjustable drag settings for each 15" brush helps clean even the toughest debris from conveyor chains and trolleys.
  • Easy to use spring loaded lockout pins allow brush unit to disengage chain until next cleaning period.
  • Non-Power brush units are available for the following track configurations: Monorail, Inverted Monorail, C-Hook, Enclosed track, and Inverted Enclosed track.

FEATURES

POWER BRUSH UNITS

  • Adjustable air cylinders allow for proper brush tension against chain
  • Twin drive industrial motors
  • Motors automatically reverse rotation from last cleaning cycle. (ensures longer brush life)
  • Easy to replace brush stacks
  • Multiple controller configurations
  • Lifting hooks
  • Beacon and buzzer alarm sounds 7 seconds before brush unit engages to ensure personnel are clear of brush unit
  • Oil impregnated arm bushings for extended life

NON-POWER BRUSH UNITS

  • 15" cleaning brushes on angled hubs to optimize cleaning area.
  • Independent brush drag controls
  • Quick mount clamps for Monorail tracks
  • Lockout pins for quick chain disengagement
  • Greaseable shafts for extended life.

SPECS

POWER BRUSH UNITS

  • Shop air required (25psi min)
  • 120VAC @ 15 amp or 220VAC @ 10amp dedicated circuit
  • 1/3HP 60Hz twin drive motors with automatic reverse rotation.
  • Greaseable heavy duty brush shaft bearings.
  • Dual 4" adjustable air cylinders.
  • Brush torque 200 in/lbs

NON-POWER BRUSHES

  • 15" replaceable steel brushes
  • Manual lockout and engagement
  • Adjustable drag settings