When it’s time for an oil change, knowing what engine oil to use is essential. The answer to that question gets more complex every day. The latest engines are getting smaller and more powerful all the time, and manufacturers are specifying complex full synthetic oils to cope with higher engine pressures and meet fuel efficiency targets.
If you’re driving a muscle car or a European import, the manufacturer may well specify a full synthetic engine oil. Alternatively if you’re driving an older domestic vehicle, the manufacturer may recommend a mineral oil. However, even though that’s the most economical option, a full synthetic will almost certainly look after your engine better. Knowing what engine oil to use at every oil change is essential.
Your owner’s manual will tell you which industry specification, type and grade of oil the manufacturer specifies.
Viscosity is a measurement of the thickness and 'ease of flow' in any liquid. For example, water is a thin liquid that flows freely, so we say that it has a low viscosity. Honey, on the other hand, is relatively thick and flows more slowly. So we describe honey as having a high viscosity. It's also worth noting that honey flows more easily - and is therefore less viscous - when it is slightly warm. Engine oil behaves in pretty much the same way, which is why mechanics will usually run an engine for a minute or two before draining used engine oil away to replace it.
What is Viscosity?
Engine Oil Types
There are so many engine oils out there, which one is right for your vehicle? Well, there are three basic types: mineral, part synthetic and full synthetic. Mineral oils are the least refined of the three, which means they cost less, but also provide less protection, performance and economy than the other options. Part synthetic engine oils are a blend of mineral oil and synthetic oil, to give added performance, but still at a lower cost than full synthetic engine oils. Full synthetics are the most expensive engine oils as they are highly refined, but offer the best and protection and economy to absolutely every vehicle.
Modern day engines are smaller but more powerful than ever, operating at more than twice the internal pressure of older engines. Castrol EDGE is our strongest engine oil, fully synthetic and liquid engineered with Fluid TITANIUM Technology to make it strong enough to handle the demands of today's engines at all times.
Castrol EDGE Supercar with Fluid TITANIUM is engineered with our most advanced technology for maximum performance. It is tested in supercars and suitable for use in everyday high performance driving.
Castrol MAGNATEC and its intelligent molecules will protect your car’s engine during the critical warm up stage when up to 75% of engine wear occurs. For instant protection from the moment you start.
Castrol GTX ULTRACLEAN's synthetic technology keeps your engine 50%** cleaner and helps extend the life of your engine.